What’s The Cost To Reline Sewer Pipe In Coral Gables FL?

cost to reline sewer pipe in Coral Gables FLIn the old days, pipe repair would mean days of digging, destroying your yard and spending a fortune. Today’s technology gives us another plumbing option that involves less time and damage than the traditional method.

Sewer relining is a new technology revolutionizing sewer repair. Also known as the No-dig, or the Trenchless sewer repair, sewer relining is found to be faster than the traditional methods. Here are more advantages of the no-dig sewer repair method:

  • Sewer relining will give you a new and high quality sewer line that is resistant to corrosion and leaks, and is expected to last for about 50 years or more.
  • Sewer relining results in better flow capacity which would mean an improvement in the overall sewer system function
  • It requires no excavation, so your lawn and driveway remain untouched.
  • No unsightly and dangerous trenches.

By now you may be asking: “How much does it cost to reline sewer pipe?” Sewer relining may cost almost the same or may even be a bit more expensive than the old method. However, when you consider how much time and money you can save by not having to repair your yard and garden after being destroyed by the digging, you will see that sewer relining is a cost-effective sewer repair method. That is also one of the reasons why it has gained so much popularity.

The cost depends on the location. Price might range between $100 and $200 per linear foot, or a total of $4000 to $6000, compared to $3,000 to $7,500 that a conventional digging would cost.

Now that you know the cost to reline sewer pipe in Coral Gables FL, it’s time to contact a certified plumber. Visit Florida.Plumbers911.com or call Plumbers 911 Florida at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL) to schedule a service.

Be sure to check out this article with some tips to prevent broken pipes and watch this video showing some plumbing repair tips you can use.

How Much Does It Cost To Have Hot Water Heater Installed In Frederick MD?

how much does it cost to have a hot water heater installed in Frederick MDAre you considering a hot water heater system to be installed in your home? Water heaters provide a supply of hot water for homes where it is needed on demand. It enables you to immediately use hot water for your daily activities and can help you save money and conserve energy in the long run.

So how much does a hot water heater installation cost? Installation cost of water heaters depends on several factors. This article by Home Advisor informs us about the average reported cost of water heater installation and explains different factors that influence the installation price:

How Much Does it Cost to Install a Water Heater?

On average, water heater replacement or installation costs $870, with most homeowners spending between $700 and $1,100. This data is based on actual project costs as reported by HomeAdvisor members.

Hot water is an essential part of modern life, a necessity rather than a luxury. So choosing and installing a water heater is a very important decision in the life of your home. Whether you are replacing an old water heater or installing a brand new system, you may be concerned about the price. There are a number of factors that play a part in the cost of installing a new hot water heater.

Hopefully after reading the article above, you will have an idea about how much a typical water installation should cost. You will come to understand that the cost of installing a new water heater depends on these major factors: the type of water heater you chose and the installation site. If you are looking to replace an existing water heater system, the price depends on the type of your current water heater, the type of hot water heater you want to replace it with and the installation site. Check out this article by Angie’s List to get more ideas about the cost of water heater installation and other factors to consider when installing a water heater:

What Factors Influence The Cost of Water Heater Installation

How much should installing a new water heater cost? And what factors influence that price?

If you notice your showers are becoming shorter and shorter due to a lack of hot water from the water heater, it’s likely you’ve asked yourself this question.

According to highly rated plumbing companies Angie’s List spoke with, the average lifespan of a traditional tank-style natural gas water heater or electric water heater is only eight to 12 years, making a water heater replacement one of the most common home improvement investments.

I hope this post helped you answer the question: how much does it cost to have a hot water heater installed in Frederick MD. You may also want to read about the common problems of water heaters you can encounter and fix by yourself. Note however, that some water heater problems require professional help in order to be fixed properly and quickly. For complicated water heater installation and repairs, you may want to hire a professional plumbing company to help you. Visit www.WashingtonDC.Plumbers911.com now or call 1-877-7-4LEAKS to schedule a service!

Undecided whether to do it yourself or hire a professional? Check out this video by Lowe’s Home Improvement showing the basics of Gas Water Heater Installation:

What’s The Drain Pipe Relining Cost In Fort Lauderdale FL?

plumbing and drawings, construction still lifeIf your house is old, chances are, you’ve been experiencing problems with your drainage more than usual. Time and the daily wear and tear can really take its toll on your pipes especially if you haven’t been maintaining them or having them inspected as often as you used to.

Years of damage incurred by improper maintenance, improvements on the house, and trees can shorten the life span of your drain pipes. You might be looking at replacing them but that major undertaking can be really costly and unnecessary especially if you’re not looking to keep the property. The best and most practical solution for most homeowners would be to reline their drainpipes. After all, the mere thought of digging and having your drain system overhauled completely is a tedious restorative, not to mention disruptive process!

Now that you’ve considered that, here are some costs that you need to prepare for before going through with the project:

How Much Does Sewer Line Replacement Cost?

Trenchless sewer replacement uses minimal digging with one of several methods — pipe-bursting, in which a machine breaks and pushes out the old pipe while pulling through and installing a new pipe in its place. Expect to pay about $60-$200 per foot,

The previous article already gave a brief background on the expected cost of having your drain pipes relined. The process, called trenchless sewer replacement, employs pipe bursting. Pipe bursting is when a machine is used to push out the old pipe and installs a new one.

The article states that some considerations also include the size of the house and the extent of the damage done to your pipes. Homeowners should also factor in repairs for the sidewalk as well as permits. You should make sure that your contractor is handling the necessary paperwork that you need to prepare just in case the pipe in question is located near public spaces.

Another important factor to consider is material and methods used by your plumbers. Some would require the use of  video camera inspection. This is important because relining is an inherently invasive process. This would help them gauge the extent of the work that needs to be done.

This article explores the costs and benefits some more:

How much does trenches pipelining cost

So you’ve had a pipe video inspection done and the plumbers say that your cast iron pipe have to be replaced. Then you did some research and found out by pipe lining and that it could save you a lot of money. The question is how much money?

We hope the article helps you figure out drain pipe relining cost in Fort Lauderdale FL. Check out how to repair underground water pipe. For more of your plumbing needs, give Plumbers 911 Florida a call using these numbers: 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL). Still having pipe problems?

Should any problems arise, check out this video on plumber availability!

What To Do When Your Sink Is Clogged In Wellington FL

designer kitchen sinkClogged sinks can be a drag but with the right tools anyone can solve it. There are different options and solutions available for homeowners with clogged sinks. Here are some of them:

Use a plunger

A plunger is one of the easiest ways to clear your sink of clogs and blockages. A word of warning though: before attempting to use the plunger on a clogged sink, make sure you didn’t treat your drains with harsh drain cleaners beforehand.

  1. If your sink has a drain hose or another drain opening, clamp or plug it with a wet rag before plunging.
  2. Seal the drain with a plunger and fill the sink with enough water to submerge the plunger.
  3. Start plunging the drain.
  4. Pull out the plunger and check if the drain works better.
  5. Repeat steps 2 through 4 until you see improvements.

 Check the trap

If the plunger method doesn’t work, it’s possible that the clogs are bigger than you think. Again, it’s important to make sure the drain isn’t filled with harsh drain cleaners before you unscrew the trap. It would also help to have a bucket underneath the trap before you remove it so it catches the water in the drain.

  1. Unscrew the trap from the drain pipe.
  2. Once unscrewed, check the trap for debris and clear it, if any.
  3. Reattach the trap to the drain pipe and check to see if the water drains properly.

Snake the drain

If the trap is free from debris but your sink is still clogged, it might be time to snake the drain. A drain snake is relatively easy to use. Have a bucket ready to catch clogs. Here’s how:

  1. Remove the trap from the drain pipe.
  2. Insert the drain snake into the drain. While pushing it in, remember to rotate clockwise.
  3. When you hit a clog, try pushing and see if you can break it.
  4. Pull on the snake to remove the clog from the drain.

We  hope these steps show you what to do when your sink is clogged in Wellington FL. If you need help on how to replace kitchen sink pipes then check out that link. Remember, you can always reach out to www.Florida.Plumbers911.com to help you with all your plumbing needs. You can reach them at 305-662-0668 (Miami-Dade County FL), 954-468-0512 (Broward County FL), 561-327-6287 (Palm Beach County FL).

How To Fix Garbage Disposal In Lantana FL

fix garbage disposal in Lantana FLYour garbage disposal is also a valuable appliance at home. It makes cleaning up after dinner a lot easier and faster. Instead of scraping off food wastes from the plates, transferring them to plastic bag and then throwing them all in the garbage bin, you can simply throw in some of the wastes into the sink drain and grind them using the disposal machine. Aside from convenience, you will also help the environment by reducing the amount of waste materials that you’ll give to the garbage collector. What you have to remember though is that not all wastes can be ground using this appliance. For instance, you should not grind coffee grounds, cat litter, hard objects like bones, potato peels, pasta, rice and other stringy food items. Otherwise, these things may damage your garbage disposal machine. With that said, let me share with you some DIY guides on how to handle clog and leak problems. In case your disposal gets clogged up, follow this instructional guide:

How to Unclog a Garbage Disposal

Garbage disposals can clog easily with food products, especially if not enough water is used to flush the drain. You can remove small clogs yourself; however, it is a good idea to read your garbage disposal manual before you do. Read more to find out how to unclog a garbage disposal.

Determine what the clog is. Use a flashlight to look down the drain. This will affect how you plan to treat it. If you believe that it is clogged by something other than food, do not run water and try to unclog it using the same methods you would with food. If it is a valuable object, such as a ring, you may want to call a plumber immediately, to improve the chances it can be removed. If the clog has developed over time, it is most likely because there is too much food debris and not enough water. You are more likely to break up the clog and push it through than pull it up.

That was such a detailed guide. Just follow each of the steps carefully and you’ll surely fix your clogged garbage disposal in a snap! Anyway, leaks are also among the common problems that you may encounter. In such a case, follow this article instead.

How to Fix a Garbage Disposal: Leaking Garbage Disposal

The tools that we are going to use today are a large set of slip joint pliers, a custom wrench that comes with most garbage disposals and probably a flat bladed screwdriver. Alright! Now we are going to get a look at where the leak is on this particular disposal. First, we are going to unplug it for safety. We have just a regular household plugin here where we can take out and set it aside, so now the power is completely off for this disposal. We’ve got several pipes here which let us drain the water out and we are going to just loosen them up. Some times they are finger tight, sometimes you need a little wrench. Let’s just take these loops and see what comes out. Normal P-traps, this is PVC pipes, nice, easy to use, but they will leak sometimes.

I hope that you learned how easy it is to fix garbage disposal in Lantana FL. Also read this article on how to install a garbage disposal in case you need a new unit installed. And should you need expert plumbing help, just call Plumbers 911 Florida at 305-662-0668 (Miami-Dade), 954-468-0512 (Broward) or 561-327-6287 (Palm Beach) to schedule an appointment with their expert plumbers.

Learn all about Plumbers 911 Florida’s excellent plumbing services! Watch their video now.

The Washington DC Plumber’s Guide On How To Use Drain Rods

Washington DC plumber’s guide on how to use drain rodsDrain clogs are not surprising at all. Over time, your drains will get blocked up due to several possible factors such as the accumulation of soap or shampoo scum, food particles, grease, hair or sometimes, even foreign objects that have accidentally infiltrated the pipes. Fortunately, it is easy to get rid of blockages especially if you have the right tools. Among the popular ways of unclogging drainpipes include the use of drain rods.

What are drain rods?

Drain rods are stiff yet flexible rods that are about one meter long per stick but they can be screwed together to reach further down the drain.  They are also often made from polypropylene material but some of the expensive types are made from steel. They usually come in sets and are available in blue or black colors. These rods are designed with unblocking tools which can either be a pivoting metal plate or an auger. The first one is great for dragging or scraping anything out of the pipes. The second one is designed to break through clogs and hook out substances.

How do you use drain rods?

  1. Wear your protective rubber gloves.
  2. Screw your drain rods together to reach into the drain. Make sure that the ends of the rods are screwed together in a clockwise manner. This will lock both ends tightly.
  3. Insert one end of the rod in the drain hole until you reach the blockage. Push the rod into the solid in order to loosen it up. Keep on driving the rod forward until the blockage breaks into smaller pieces or until it flows through the pipes.
  4. If you feel like you have caught something sticky, slowly pull out the rod and dispose the waste properly. You might want to wash the rods to avoid putting the substances back inside the pipes.
  5. Run the tap to wash the sediments inside the drain and test if the clog has been removed. If the drain is still not working properly, insert your drain rods once again and repeat the clearing process. If you feel like the clog has moved further down or pass a trap or a curve, remove the rod and use a natural drain cleaner such as baking soda and vinegar.
  6. After zapping the waste substances with your baking soda and vinegar, run the tap and test again for leaks.

I hope that this Washington DC plumber’s guide on how to use drain rods is helpful enough for you to remove clogs from your drains. Also read about how to prevent drain clogs to avoid such a problem in the future. If you need a professional to help you out, just call Plumbers 911 Washington DC or visit their website to schedule an appointment.

Learn how to clean a sink drain properly by watching this video!

How Much Is Septic Tank Pumping Cost In Washington DC?

 septic tank pumping cost in Washington DCYour septic tank is a major role player in your plumbing system. Without it, where will all your wastewater go? If you’re living in a congested area like the city, your house is probably connected to a municipal sewer system. Otherwise, you most probably have a septic tank buried somewhere in your yard. It’s pretty durable being made from fiberglass, concrete or plastic material. However, it may overflow when not pumped. Learn more about it from this very informative article:

Septic Tank Pumping

Septic tanks are installed in about 1 in 4 homes in the U.S. They are a clean and cost effective way to get rid of waste waster. Managed properly septic tanks can give you many years of trouble free drainage of waste water. One important component of maintaining your system is regular septic tank pumping and inspection.

Having the septic tank inspected regularly will help you determine when pumping is necessary. Most septic tanks need to be inspected about once every 3 years. Some systems with mechanical components will need to be inspected more often. The system’s documentation will have a recommendation about the frequency of inspection.

According to About.com, homeowners often ask about the frequency of septic tank pumping. And the truth is, there is no single answer to that question. How often a tank gets pumped out depends on many factors including the size of the container or the amount of waste the household produces. The best way to find the answer out is to simply consult a professional plumber who can check your tank for you and inspect your plumbing system as well. The only question now is how much does the service cost? Here’s an article that may give you answers:

How Much Does it Cost to Clean or Pump a Septic Tank?

The average national cost of septic tank pumping and cleaning is $542, with most homeowners spending between $457 and $627. This data is based on actual project costs as reported by HomeAdvisor members.

If your tank hasn’t been pumped in the last 5 years, you are seeing wet areas or standing water above your drainfield, your toilets are running slowly or there are odors in your home, you may need to have your septic system cleaned. Below are some things to think about that will influence the cost of your septic system cleaning.

I hope that my blog answered your question about the average septic tank pumping cost in Washington DC. Also check out these septic tank maintenance tips to ensure your tank’s longevity. And should you need this kind of plumbing service now, visit www.WashingtonDC.Plumbers911.com  and schedule an appointment!

Find out what you should expect from Plumbers 911 Washington DC! Watch this video now.

All About Plumbing In Surfside FL

all about plumbing in Surfside FLIf you want to do great at DIY plumbing, you’ll have to get to know your system well. Adequate knowledge will lead you to proper troubleshooting and excellent repair of plumbing issues that you’ll sooner or later encounter. So to start off my blog post, you should know that your plumbing is comprised of two sub-systems: the clean water line and the sewage line. It’s pretty easy to figure out which is which, right? The main water line is the one responsible for supplying your fixtures with clean, drinkable water that you use for bathing, cooking and what-nots. You should find a main water shut off valve outside your home. It’s the one that regulates the flow of water throughout your pipes, which is by the way, facilitated by pressure. There’s a meter installed as well that monitors your water consumption. It’s how you are charged you monthly water bill.

Your sewage line, on the other hand, is the sub-system that’s responsible for transporting the soiled water and other waste materials from your drains and into the treatment facility where your house is connected to. Speaking of wastewater treatment, your home can either be connected to your own septic tank or a public sewer system. A septic tank is a durable container made from plastic, concrete or fiberglass material. It is buried somewhere in your yard and is responsible for holding and treating the sewage that’s produced whenever you use your plumbing fixtures.

Now one thing that you have to remember about septic tanks is that it can’t hold too much sewage. It has a limit, depending on its size. With that being said, you have to minimize your water usage so as not to fill the tank up so fast. Anyway, there are still a lot of things to learn about your plumbing system but I will be sharing those on my next blog post.

I hope you learned all about plumbing in Surfside FL today. Also check out this article that features home plumbing repair tips to get you prepared for plumbing emergencies. Should you need expert assistance, don’t forget to visit www.OrrPlumbing.com or contact them through phone to schedule an appointment.

Find out how you can fix common leaks at home. Watch this video now!

Top 2 Solutions to Common Garbage Disposal Problems

Garbage DisposalI know for a fact that people in the area I live (Miami, FL) love to eat!  I attend cookouts and BBQ parties almost every other week (that’s why I’m gaining so much weight :) )

Anyway, after the food has been eaten, we have to do what we all hate – clean up! That means sorting out cups, taking out the trash and disposing the leftover food.

Now, this what our garbage disposals are for!  And since this appliance is used almost daily, it’s common to encounter some problems due to overuse.


My Disposal isn’t grinding properly

  • Not only is a grinder that isn’t grinding frustration, but it is very likely to end up clogging your drains. Nothing is quite as unpleasant as scraps of food clogging your drain. Try this if you’re having grinding problems:
  • If your grinder isn’t working as well as it should, you could remedy this with something as simple as too little water in the drain. Try running some cold water at full stream while you’re grinding waste, and keep it running for a few seconds thereafter. The water helps break down the food that you want to grind, in turn helping your grinder work better as well.
  • As with anything, over time and years of use, your disposal blades will become blunt and useless. You can either have the blades replaced by an appliance repair company, or you can save some cash by buying a new disposal all together. Compare prices to see what would work out best for you and your budget.
  • To make the most of the lifespan of your appliance, don’t grind up items that are too hard to dispose of or that are highly fibrous. A simple thing like this aids longevity of our most used appliance.

My Disposal isn’t running but is making a humming noise

  • When you switch on your garbage disposal but find that it isn’t doing anything other than humming to you, you’re probably dealing with a jammed disposal. All is not lost though; try these tips to see if you can fix this problem yourself:
  • Before you do anything – and I mean anything – make sure that you switch off the appliance power at the fuse box. Remember, blades and automatically switching on is not a good combination when your hand is in there!
  • At the bottom of the garbage disposal, you’ll see a small hole that is connected to the flywheel. Insert the offset wrench that you got with your disposal unit into that small hole. Turn the wrench clockwise, which will hopefully dislodge any jammed impeller or flywheel. After this, turn the disposal on again and test to see if it is working.

These are all pretty common complaints when dealing with a garbage disposal, but they’re resolved easily. If you are still struggling to get your unit to function, you might have to turn to the local  professionals in Miami to help figure out why your garbage disposal is not working.

Hint: Watch the video to find out who I call when I get terrible plumbing issues!